| Job Description: |
Minimum Requirements:
o High school degree or GED equivalent
o Must have a minimum of 5 years experience in similar QAQC type roles for major high tech construction projects
o Must have journeyman level experience in the specific trade discipline (Electrical, Process, Mechanical, LSS, Architectural-Cleanroom)
• Skills
o Able to communicate with trades (speak language of the trades). Technically skilled to act as the interface between trades, the designers and the tool owners.
o Need to understand tool drawing set for the corresponding functional area, to solve field contraction issues.
o Thorough understanding of respective discipline (EL, ME, PI, AR, LSS) to drive trade’s coordination.
o Understanding of Area Layout.
o Knowledge of microschedule for prefacilitation, understanding of sequence of construction activities and tool sequence.
o Able to track hours in the field and to assess earned value. Coordinate prefacilities readiness check lists.
o Able to resolve technical construction questions in the field.
o Strong knowledge is required in the following areas; local and national codes; construction drawings/symbols; acceptable industry standard/practices
Mechanical Specific Information
• Responsible for all aspects of construction pertaining to the installation, testing, and test and balance of all dry mechanical systems including exhaust and supply air systems.
• Responsible for all aspects of safety compliance specifically for the mechanical contractor, and generally site wide.
• Serves as the technical content expert relative to mechanical systems fabrication, installation, and testing. Possess a thorough understanding of acceptable industry standards for quality relative to all plastic, metal, Teflon lined stainless steel, and FRP ductwork systems.
• Responsible for performing, supervising, and tracking all QAQC checklists and leak testing for all tool types.
• Desired Mechanical Professional Certifications:
o SMACNA – Sheet Metal And Air Conditioning Contractors’ National Association, Inc.
o ASHREA – American Society of Heating, Refrigeration, and Air Conditioning Engineers, Inc.
Process Piping Specific Information
• Possess a thorough understanding of acceptable industry standards for quality relative to all plastic, metal and/or hybrid piping materials likely to be used in microelectronics construction. This candidate will also be responsible for writing, interpreting, and maintaining installation guidelines and situational bulletins and memos with compliance to existing contract guidelines.
• Content expert in piping construction and be able to deliver a message of expectations such that interpretation is not left to chance.
• Strong knowledge is required in the following areas:
o Carbon steel and stainless steel welding and weld characteristics
o Heat fusion and solvent welding of various plastics
o All other methods of pipe joining i.e. threaded, compression, face seal, flared fittings, brazing, soldering, etc.
• ASME B31.3 compliant weld certificate in one or more of the following methods; SMAW, GTAW, GMAW
• ASME B31.3 compliant weld certificate (automatic orbital welding for high-purity gas systems)
• Certified by George Fischer on one or more of the following PVDF fusion processes; GF Model IR 63; GF Model IR225
• Be a qualified PVC/CPVC bonder in accordance with ASME B31.3 (Chapter VII).
• Be certified by a PVC/CPVC manufacturer in the fabrication of solvent cemented joints, the installation of valves, the assembly of mechanical (threaded) connections, and other piping system components.
Electrical Specific Information
• Support all customers in driving resolution to design package and panel schedule issues
• Manage the EEW, COHE and lock out/tag out procedures and sign-off
• Review Electrical SIPP’s for accuracy of content
• Desired Electrical Professional Certifications
o ASSE – American Society of Safety Engineers
o IAEI – International Association of Electrical Inspectors
LSS Specific Information
• Coordinate with Functional Area Teams to hook up cable and tubing from the manufacturing tool to the LSS system panels. Other trades will install Cable and tubing into the existing raceway up to the LSS panels. The Technician will connect the cable and tubing to the LSS panel I/O points using information from the “Gas Detection functional Matrix” and/or address lists provided by AZFO - LSS
• Configure LSS system to handle additional capacity as required by the project. Assist with installation and /or re-configuration of MDA System 16 components, UIO-12’s,VMB’s, Gas cabinets, Sieger H2 and Co detection systems, and any other systems related to LSS that are required to meet the needs of the tool ramp.
• Assist in creating and maintaining a micro schedule of LSS SL2 (Safety Level 2) Tool Testing Schedule based on the Primavera Scheduling tool and coordinate this micro schedule with the Functional Area Teams, trades (craft) , APCI (Air Products), AZFO/LSS, and others who have a stake in the tool install as related to LSS.
• Coordinate between FA (functional area) Tool Owners, AZFO/LSS, and APCI tech’s to accomplish EHS required SL2 testing (LSS testing) on each tool set. Participate in the test. Verify correct functionality of test. Make any corrections as needed for successful test.
• Manage SL2 LSS documentation and distribute it to AZFO/LSS and Tool Owners upon completion of testing. Store test documents into LSS test archive.
Architectural Specific Information
• Coordinate with multiple customers in regards to the installation of cleanroom components.
• Candidate must have extensive knowledge of cleanroom construction, microcontamination and certification
• Work directly with PM’s & CC’s in the bay and mini-environment certification processes, individual will assist in the certification turnover process to manufacturing.
• Individual needs to coordinate with all customers in regards to gown room activity, pass-through’s and material moves in and out of the Fab, including the planning and communication of gown room/pass-through locations and re-locations.
• Individual will support concrete coring as needed.
• Individual will monitor traffic in and out of the cleanroom
• Person to assist in the coordination of the elevators availability
• Person responsible for the protection of Intel facilities, work to alleviate any damage caused to the facility due to high volume movement of equipment and personnel.
• Manage interstitial/ceiling access program and construction activity
• Assist in the coordination of cleaning efforts
Qualified applicants who are offered a position must pass a pre-employment substance abuse test.
Job Description:
• Code compliance and design constructability resource for CS Construction Management and Engineering and Design Groups. Discipline specific installation support (ie. EEW kits for Electrical, high purity analytical for Process, exhaust test and balance for Mechanical, cleanroom for architectural)
Position Deliverables:
• Qualified to inspect all materials received prior to installation or use to ensure fabrication specifications are met
• Ensure that installations are performed in accordance with the following:
o Intel Master Specifications, Intel [SID] Standard Installation Details, State and Local Codes UMC, UBC UPC and NFPA, SMACNA Standards, and International Codes, ASME, AWS
• Interface with Intel OM/PM/CC and Trades on matters affecting the project quality of work and system operation
• Interface with Contractor supervision on functions and requirements for installations
• Assist Intel and trades in identifying and solving construction problems
• Perform all necessary inspections and equipment signoff requirements
• Participate in SOP and perform SIPP and Pre-Task Plan audits for compliance to Intel requirements
• Coordinate with tool owners to have the trades prepared for SL1/SL2
• Able to resolve technical construction questions and answer discipline specific RFIs.
• Also includes any discipline specific requirements as listed below. EOE M/F/D/V
|
